Z-330P2J2 xdsl over pots cpe in-line filter Z-330P2J2 block schematic www.pulseeng.com ex132.a (10/09) z-blocker? Z-330P2J2 xdsl over pots cpe in-line filter description the Z-330P2J2 is a small, in-line, ansi t1.421- compliant customer premises equipment (cpe) flter designed to expedite the service delivery and improve the performance of digital subscriber line (dsl) and home phoneline network (hpn) ser - vices over plain old telephone service (pots). the Z-330P2J2 flters all telephones, facsimile (fax) machines, answering machines, and other telephone equipment. its third-order flter design electronically isolates the high-speed dsl and hpn data streams from the voice-band pots to provide premium voice quality and optimal dsl and hpn data rates. applications the dsl user installs the Z-330P2J2 in-line flter into each telephone line jack in the subscribers premises that contains voice-band equipment devices, including corded/cordless telephones, answering machines, fax machines, 56kb/s and lower rate modems, automatic dialers, recorder connectors and satellite television set-top boxes. the Z-330P2J2 in-line flter is one of many fl - ters and splitters manufactured by excelsus for subscriber-installed digital services within homes, offces, and hotels. excelsus is the number one selling brand of dsl flters worldwide. features isolates telephone equipment impedances from the xdsl and hpn systems blocks xdsl and hpn signals from voice-band equipment up to 10 megahertz provides a dsl convenience jack for connecting a dsl modem or hpn device meets ansi t1.421 (2001) north american dsl flter standard compatible with all major xdsl standards including adsl full rate (itu-t g.992.1), adsl g.lite (itu-t g.992.2), adsl2 (itu- t g.992.3 and .4), adsl2+ (itu-t g.992.5 in analog mode), adsl2++, vdsl (itu-t g.993.1), vdsl2; also v.90 and metallic loop testing compatible compliant with ul / csa 60950, fcc cfr 47 part 68 6 5 4 3 2 1 6 5 4 3 2 1 6 5 4 3 2 1 line 1 rj11-j ac k rj11-j ac k rj11-j ac k phone dsl
12220 world trade drive, san diego, ca 92128 usa direct: 858 674 8100, fax: 858-385-8003 www.excelsus-tech.com specifications subject to change without notice. excelsus is a registered trade mark of pulse engineering, inc. ? 2009 pulse engineering, inc. ex132.a (10/09) z-blocker? Z-330P2J2 xdsl over pots cpe in-line filter dc resistance network port at 20ma <25 ? tip and ring to ground at 100 vdc >10 m? tip and ring to ground at 100 vdc and 200 vdc >30 k? operating current 5 to 90 ma operating voltages network tip to ring 0 to C80 vdc network tip to ring level with ringing signal of 17 to 23hz and 40 to 106 vrms -20 to C80 vdc on-hook voice band insertion loss single flter -0.5db to 1.5db with 5 flters -1.0db to 6.5db on-hook voice band insertion loss distortion single flter, 200 to 1000 hz -1.5db to 1.5db with 5 flters, 200 to 1000 hz -5.5db to 2.0db single flter, 1 to 2.8 khz -1.5db to 1.5db with 5 flters, 1 to 2.8 khz -2.0db to 2.0db on- or off-hook envelope delay 300 hz - 2800 hz <250 s off-hook voice band insertion loss single flter -0.5db to 0.5db with 5 flters -1.0db to 1.0db off-hook voice band insertion loss distortion single flter, 200 to 3400 hz -1.0db to 0.5db with 5 flters, 200 to 3400 hz -1.5db to 2.5db single flter, 3.4 to 4 khz -1.5db to 1.0db with 5 flters, 3.4 to 4 khz -2.0db to 3.25db off-hook impedance distortion phone port srl low >13 db erl >9 db srl high >3 db network port srl low >12 db erl >10 db srl high >5 db inter-modulation distortion second and third order products >60 db on-hook high band stopband attenuation from 25 khz to 12 mhz, between 20 and 90 ma >12 db off-hook high band stopband attenuation from 25 to 50 khz, between 20 and 90 ma >21 db from 25 to 50 khz, between 7 and 20 ma >13 db from 50 k to 12 m hz, between 20 and 90 ma >25 db from 50 k to 12 m hz, between 7 and 20 ma >22 db bridging loss single flter, 25 khz to 1.2 mhz <0.5 db with 5 flters, 25 khz to 1.2 mhz <1.25 db single flter, 25 khz to 12 mhz <3.0 db with 5 flters, 25 khz to 12 mhz <4.0 db connectors: one rj11 jack each for adsl modem and phone connection with a line 2 pass through, and one rj11 plug on a 4 cord for line connection. dimensions: length = 2.04in (51.9mm), width = 1.21in (30.8mm), height = 0.710in (18.0mm) compliant and listed with ul / csa 60950, fcc cfr 47 part 68 z-blocker Z-330P2J2 filter specifications
|
